Home / Shop
- Description
- Specifications
A6873B is the HP Integrity rx2600 server with one 1.5 GHz/6 MB processor with one core. It carries the 1.5 GHz Itanium 2 with 6 MB of cache and a floating point coprocessor included, with a TPM estimate of 60 K in a two-processor configuration. Up to two processors fit in the rx2600, and the 1.0, 1.4, 1.3 and 1.5 GHz speeds cannot be mixed.
Level 2 cache is 256 KB and level 1 cache is 32 KB on the rx2600 processors, with single bit cache error correction, 50 bit physical addressing and 64 bit virtual addressing.
Twelve DIMM slots hold up to 24 GB of PC2100 ECC registered DDR266A memory, installed in quads, and each quad loads across both memory buses for 8.5 GB/s total memory bandwidth, split across two 4.25 GB/s buses. Memory latency is 80 nanoseconds. The largest chip spare quad is the 8 GB AB228A memory quad, built from four 2 GB DIMMs.
On the power side, AC input is 100-240V at 50/60 Hz with a typical maximum power dissipation of 600 W and a theoretical maximum of 1,350 W. Typical heat dissipation is 1,945 BTU per hour and maximum heat dissipation is 4,375 BTU per hour. The kW rating for UPS loading is 1.3.
Four USB ports, a 10/100/1000Base-T port, a 10/100Base-T port and a 10/100Base-T management port come as standard I/O, along with VGA graphics.
| Designation | HP Integrity rx2600 server, one 1.5 GHz/6 MB processor |
| Processor | 1 x 1.5 GHz Itanium 2, one core |
| Processor cache | 6 MB |
| TPM estimate (2-processor configuration) | 60 K |
| Processors supported | 1 to 2 |
| Maximum memory | 24 GB, 12 DIMM slots |
| Internal disks | up to 3, maximum 900 GB |
| PCI-X slots | 4 (133 MHz, 64-bit) |
| USB ports | 4 |
| Typical maximum power dissipation | 600 W |
| Typical heat dissipation | 1,945 BTU/hour |
| kW rating for UPS loading | 1.3 |
| Maximum weight | 56 lb (25 kg) |
| Other rx2600 server numbers | A6870B, AB323A, AB324A |

