Home / Shop


- Description
- Specifications
00FX840 is the adapter FRU number of the IBM PCIe3 12 GB Cache RAID SAS quad-port 6 Gb Adapter, feature code EJ0L, CCIN 57CE. It is the FRU for the POWER8 systems 8247-42L, 8286-41A, 8286-42A, 8408-44E, 8408-E8E, 9080-MHE, 9080-MME, 9119-MHE and 9119-MME. The feature code itself is available as IBM #EJ0L PCIe3 12GB Cache RAID SAS Adapter Quad-port 6Gb x8.
The card is a large-cache PCIe3 SAS adapter with four mini SAS high-density connectors for SAS disks and SAS solid-state drives. It is a 64 bit, 3.3 V, bootable adapter with up to 12 GB of write cache through compression. It provides RAID 0, 5, 6, 10, 5T2, 6T2 and 10T2, with hot-spare capability on RAID 0, 5, 6 and 10, and system level mirroring through the operating system.
Adapters are installed in pairs and run in a high availability, multi-initiator RAID configuration, with the two adapters in dual-controller mode (dual storage IOA configuration). The pair mirrors write-cache data and RAID parity footprints, and if the pairing is broken the write cache is disabled. Integrated flash memory with capacitors protects the write cache on power failure, without batteries. Two SAS Adapter-to-Adapter (AA) cables are required by default on the third and fourth adapter ports (T2, T3).
Connector plug 00FW784 is installed in an empty port and prevents damage to that port whenever a cable for an adjacent port connector is plugged in or removed. The adapter is single wide, full-height and short, and needs one PCIe x8 slot per adapter. On the 8286-41A and 8286-42A it can connect an external FC 5887 drive enclosure; current SES code must be applied to the FC 5887 first.
AIX and Linux systems accept both EJ0L adapters in the same system or partition, or in two separate systems or partitions. IBM i requires both adapters in the same system and partition. The dual controllers support the Easy Tier function on AIX or Linux, moving hot data to attached SSDs and cold data to attached HDDs. Supported operating systems are AIX 6.1 or 7.1 and later, IBM i 6.1 or 7.1 and later, Red Hat Enterprise Linux 6.4 or 7 and later and SUSE Linux Enterprise Server 11 Service Pack 3 and later, on firmware level 7.8 or later.
| Adapter FRU number | 00FX840 |
| Feature code | EJ0L |
| CCIN | 57CE |
| Connector plug part number | 00FW784 |
| SAS ports | Four mini SAS HD connectors |
| Write cache | Up to 12 GB via compression; flash memory with capacitors protects it |
| RAID levels | 0, 5, 6, 10, 5T2, 6T2, 10T2 |
| Bus and slot | PCIe 3.0 (downward compatible to 2.0 and 1.0); one PCIe x8 slot per adapter; installed in pairs |
| Voltage | 3.3 V |
| Form factor | Short, full-height; single wide |
| Systems | 8247-42L; 8286-41A; 8286-42A; 8408-44E; 8408-E8E; 9080-MHE; 9080-MME; 9119-MHE; 9119-MME |
| Related feature code | IBM #EJ0L PCIe3 12GB Cache RAID SAS Adapter Quad-port 6Gb x8 |
