Home / Shop


- Description
- Specifications
The S5148F-ON is a Dell 1RU top-of-rack switch with 48 native 25GbE SFP28 ports and six 100GbE QSFP28 ports. The 25GbE ports are backward compatible with 10GbE and 1GbE servers, and the 100GbE ports run at 10, 25, 40, 50 or 100 GbE, so the switch can reach 72 x 25GbE with breakout. Dell's spec sheet gives 3.6 Tbps of full-duplex non-blocking, cut-through switching, a 16 MB packet buffer and up to 512K MAC addresses.
The -ON suffix means open networking: it supports ONIE for installing other network operating systems, and runs Dell EMC SmartFabric OS10. Dell positions it for 25GbE server access with 100GbE leaf uplinks, iSCSI with DCB lossless transport, and VXLAN L2/L3 gateway use, and it supports IEEE 1588v2 PTP in hardware. Its data plane is programmable, which Dell highlights for new or custom protocols.
Compared with 10GbE switches such as the S4048T-ON, it moves server ports to 25GbE SFP28 and uplinks to 100GbE QSFP28, so existing 10GbE SFP+ optics still work on the server ports during a migration.
Power is two redundant hot-swap supplies (100-240 VAC), with 516 W maximum and 1,956 BTU/h; a DC-powered, NEBS Level 3 version exists. Airflow is ordered either I/O panel to PSU or PSU to I/O panel. The unit weighs 22 lb (9.97 kg).
To confirm a used unit suits your rack, check the PSU type (AC or DC) and the airflow direction on the fan and PSU modules.
More from this family: Dell Switch.
| S5148F-ON Specs | |
| Model | Dell S5148F-ON |
| Ports | 48 x 25GbE SFP28 + 6 x 100GbE QSFP28 |
| Port speeds | 25/10/1 GbE (SFP28); 10/25/40/50/100 GbE (QSFP28) |
| Max 25GbE | 72 with breakout |
| Switching capacity | 3.6 Tbps full duplex, cut-through |
| Packet buffer | 16 MB |
| MAC addresses | Up to 512K |
| Form factor | 1RU, 22 lb (9.97 kg) |
| Power | 2 x hot-swap, 100-240 VAC, 516 W max; DC NEBS version |
| Airflow | I/O-to-PSU or PSU-to-I/O |
| OS | Dell EMC OS10; ONIE for third-party OS |
| Timing | IEEE 1588v2 PTP |
