Home / Shop


- Description
- Specifications
The IBM 46K8088 is the adapter field-replaceable unit for the PCIe 10 Gb FCoE 2-port Adapter, CCIN 2B3B. IBM assigns the adapter two feature codes, FC 5270 for the low-profile version and FC 5708 for the full-height version, and ties this one FRU number to both.
It is a high-performance converged network adapter. A single adapter carries data networking and storage networking traffic by using Enhanced Ethernet and Fibre Channel over Ethernet, and both FCoE and network interface controller functions are available on both ports at the same time. FCoE use requires Convergence Enhanced Ethernet switches.
The adapter connects through PCI Express x8 generation 1 or x4 generation 2, to the PCIe Base and Card Electromechanical 2.0 specifications, at 3.3 V and 12 V. Its two ports use LC multimode fiber optic connectors with SFP+ SR optics, and the form factor is short, low-profile with a standard-size bracket. The wrap plug for the LC fibre connector is FRU 12R9314; it does not come with the card and can be purchased from IBM.
Cabling uses multimode fiber with short-wave lasers: OM1 62.5/125 micron fiber reaches 33 m, OM2 50/125 micron fiber reaches 82 m and OM3 50/125 micron fiber reaches 300 m. A green SAN LED and a green LAN LED report status; both slow flashing in alternation means beaconing.
IBM ties FC 5270 to the Power S812L (8247-21L), S822L (8247-22L), S812 (8284-21A) and S822 (8284-22A), and to the Elastic Storage Server management server (5148-21L) and data server (5148-22L). FC 5708 is tied to the Power S824L (8247-42L), S814 (8286-41A), S824 (8286-42A) and E850 (8408-44E and 8408-E8E). Both feature codes also apply to the 9080-MHE, 9080-MME, 9119-MHE and 9119-MME systems.
Operating system support depends on the system: AIX 7.1 Technology Level 3 Service Pack 2 or later, AIX 6.1 Technology Level 8 Service Pack 3 or later, AIX 5.3 Technology Level 12 or later, Red Hat Enterprise Linux 6.4 and 7 or later, SUSE Linux Enterprise Server 11 Service Pack 2 or later, IBM i 7.1 or later through VIOS 2.2 or later, and VIOS 2.2.0.12-FP24 SP02 or later. The adapter supports hot swap. The adapter has a unique WWPN; after a replacement, check zoning and LUN assignments to confirm the Fibre Channel function works.
| Designation | PCIe 10 Gb FCoE 2-port Adapter |
| Adapter FRU number | 46K8088 |
| Feature codes | FC 5270 (low-profile); FC 5708 (full-height) |
| CCIN | 2B3B |
| Ports | 2 |
| Connectors | LC multimode fiber optic; SFP+ with SR optics |
| Bus | PCI Express x8 generation 1 and x4 generation 2; PCIe Base and CEM 2.0 |
| Voltage | 3.3 V and 12 V |
| Form factor | Short, low-profile with standard-size bracket |
| Wrap plug FRU | 12R9314 (LC fibre connector; separate part) |
| Cable reach | OM1 33 m; OM2 82 m; OM3 300 m |
| Operating systems | AIX; Linux; IBM i through VIOS; VIOS |
