Home / Shop
- Description
- Specifications
The AIR-ANT2465P-R is a Cisco Aironet 6.5-dBi diversity patch antenna for the 2.4-GHz band. It covers 2400 to 2484 MHz with a 50-ohm nominal input impedance and a 2:1 VSWR bandwidth across the same range. Polarization is linear and vertical, the 3-dB beamwidth is 65 degrees in the E-plane and 75 degrees in the H-plane, and front-to-back ratio and cross-pol discrimination are both 15 dB.
A 36 in. (91.4 cm) lead of AA-9303 or equivalent plenum-rated cable ends in an RP-TNC plug, and the mating connector on the radio is an RP-TNC jack. The antenna mounts on any flat indoor or outdoor vertical surface. The kit holds four #8 x 3/4 in. screws, four #8 plastic anchors and four end caps, and all four screws go in. Outdoors, the orientation arrow on the back points down to let moisture drain from the radome.
It works with Cisco Aironet access points and bridges, and with any 2.4-GHz Cisco Aironet radio device that has an RP-TNC connector. Grounding uses a static discharge unit such as the Cisco Aironet AIR-ACC245LA-R. Mount it vertically and high, clear of metal ducts, trusses, microwave ovens and 2-GHz cordless phones. Other antennas and access point accessories are listed under Cisco wireless.
| Part number | AIR-ANT2465P-R |
| Antenna type | Diversity patch |
| Frequency range | 2400-2484 MHz |
| Peak gain | 6.5 dBi |
| Nominal input impedance | 50 ohms |
| 2:1 VSWR bandwidth | 2400-2484 MHz |
| Polarization | Linear, vertical |
| 3-dB beamwidth | E-plane 65 degrees, H-plane 75 degrees |
| Front-to-back ratio | 15 dB |
| Cable | 36 in. (91.4 cm), AA-9303 or equivalent, plenum rated |
| Connector | RP-TNC |
| Environment | Indoor and outdoor |
| Compatible with | Cisco Aironet access points and bridges and any 2.4 GHz Cisco Aironet radio device with an RP-TNC connector |