Home / Shop / Dell / EMC / Servers (Dell / EMC)


- Description
- Specifications
The Dell PowerEdge M1000E is a 10U modular blade enclosure that holds up to sixteen half-height blade servers. It is the foundation of the Dell blade server architecture, and the Dell PowerEdge M1000E blade chassis pairs the blades with shared power, cooling, networking and management modules at the back.
Power comes from 3 (non-redundant) or 6 (redundant) 2360 W hot-plug power supplies at better than 91% efficiency. Redundant supplies support 3+3 AC redundancy, 3+1 power supply redundancy or 3+0 non-redundant modes, and Dynamic Power Supply Engagement can put lightly loaded supplies into standby. The supplies need 200+ volt AC input, and Dell offers 20A, 30A and 60A single-phase or 30A three-phase power distribution options. Nine hot-pluggable, redundant fan modules come standard.
The enclosure has up to six I/O modules for three fully redundant fabrics, on a passive midplane with greater than 5Tbps of total I/O bandwidth and support for up to two ports of up to 40Gbps from each mezzanine card on the blade. Modules include PowerConnect M6220, M6348 and M8024 Ethernet switches, Cisco Catalyst Blade Switch M 3032, M 3130G and M 3130X, Brocade M5424 8Gb Fibre Channel, Mellanox M2401G and M3601Q InfiniBand switches, and Gigabit, 10Gb and Fibre Channel pass-through modules.
One Chassis Management Controller is standard and a second is optional for redundancy, with two 10/100/1000Mb Ethernet ports and a serial port, secure web and command line access, and real-time power monitoring. An optional Avocent iKVM switch enables the front USB keyboard and mouse and video ports, and the front control panel has a graphical LCD. FlexAddress assigns the WWN or MAC address of Fibre Channel, Ethernet and iSCSI controllers by slot.
The chassis measures 44.0 cm high, 44.7 cm wide and 75.4 cm deep and weighs 98 lbs empty, 176 lbs with all rear modules, and 394 lbs fully loaded with blades. RapidRails static rails fit 4-post square hole racks and VersaRails static rails fit square or unthreaded round hole racks. External storage options include Dell EqualLogic PS Series, Dell/EMC AX, CX and NS Series, PowerVault MD Series and PowerVault NX Series.
Other Dell modular systems include the M640 Dell PowerEdge half-height blade server and the MX7000 Dell PowerEdge 7U modular enclosure, and further servers and chassis are collected in Dell server systems.
Related: Dell PowerEdge M610 parts
| Model | Dell PowerEdge M1000E |
| Form factor | 10U modular blade enclosure |
| Blade capacity | up to 16 half-height |
| Power supplies | 3 or 6 hot-plug, 2360 W each |
| Cooling | 9 hot-pluggable fan modules |
| I/O modules | up to 6, three redundant fabrics |
| Midplane bandwidth | greater than 5Tbps |
| Management | 1 or 2 Chassis Management Controllers |
| Dimensions (H x W x D) | 44.0 x 44.7 x 75.4 cm |
| Weight | 98 lbs empty chassis |
| Rack support | RapidRails, VersaRails static rails |
| Compatible with | Dell PowerConnect M-series, Cisco Catalyst M-series, Brocade M5424 and Mellanox InfiniBand I/O modules; Dell EqualLogic PS, PowerVault MD and NX storage |
