Home / Shop
- Description
- Specifications
The AIR-PWRINJ1500-2 is a Cisco Aironet power injector for the 1520, 1550 and 1570 Series, for indoor environments only. Inside, a power supply produces 56 VDC, and the injector combines that with the Ethernet data signal and sends both to the access point, delivering up to 80 W over all four wire pairs. The spare-part number is AIR-PWRINJ1500-2=.
Input is 100 to 240 VAC. Output is 56.0 VDC with a 54 to 57 VDC tolerance and a maximum current of 1.43 A, split across two outputs of 56 VDC at 0.71 A each, and no-load current is 15 mA. The unit measures 8 x 4.25 x 2.5 in. (20.3 x 10.8 x 6.3 cm) and mounts on horizontal or vertical surfaces, always in a vertical orientation.
The TO SWITCH port takes a shielded CAT5e or better cable from a 10/100/1000 Ethernet switch, hub or network. The TO AP port sends power and data to the access point on shielded, outdoor-rated CAT5e or better cable with a 0.20 to 0.35 in. diameter, and that run must be longer than 10 ft (3 m). Three LEDs (AC POWER, AP POWER and FAULT) report status. The injector does not work with the Cisco Aironet 1560 Series. Further access points and accessories sit in the Cisco wireless category.
| Part number | AIR-PWRINJ1500-2 (spare AIR-PWRINJ1500-2=) |
| Type | Aironet power injector |
| Input voltage | 100-240 VAC |
| Output voltage | 56.0 VDC (54-57 VDC tolerance) |
| Maximum current | 1.43 A |
| Outputs | 2 x 56 VDC at 0.71 A |
| No-load current | 15 mA |
| Maximum power | up to 80 W over four wire pairs |
| Ports | TO SWITCH and TO AP, RJ-45 10/100/1000Base-T |
| Cable | shielded CAT5e or better, outdoor rated to the access point |
| LEDs | AC POWER, AP POWER, FAULT |
| Dimensions (L x W x H) | 8 x 4.25 x 2.5 in. (20.3 x 10.8 x 6.3 cm) |
| Compatible with | Cisco Aironet 1520, 1550 and 1570 Series (not the 1560 Series) |